Filter By:
- Tires (11)
- Rims (20)
- Hubs (14)
- Spokes (2)
- Nipples (2)
- Tubes (2)
- Small Parts (4)
- Complete Wheels (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels
$130.00
- Jitsie's superlight 116mm disc hub from their race range of components.
- Designed with input from multiple time World Champion Dani Comas.
- Manufactured in Belgium.
- 116mm spacing fits most 20" frames and some 24"/26" frames.
- Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water.
- Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight.
- Features a hollow aluminum axle, further reducing weight.
- Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange.
- Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket.
- Black or Red anodized finish with Jitsie laser etched logos.
- Supplied with steel bolts and Jitsie's superlight low profile aluminum washers.
- Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam).
- 32h spoke drilling only.
$190.00
- Pre-built front 20" disc wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim.
- 3-Cross lacing for good strength and durability.
- Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.
$190.00 - $195.00
- Pre-built front 26" wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim.
- IS 6-Bolt disc mount on disc wheel.
- 3-Cross lacing for good strength and durability on disc wheels.
- Radial lacing on non-disc wheels.
- Standard 100mm hub spacing fits a wide variety of forks.
$195.00
- Pre-built rear 24" disc rear wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim.
- 3-Cross lacing for good strength and durability.
- Spaced for use with 116mm frames using snail cams.
- Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams.
- IS 6-bolt disc hub is compatible with all 6-bolt rotors.
$195.00
- Pre-built front 24" wheel from Jitsie.
- Assembled in Belgium by Jitsie's expert wheelbuilders.
- Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim.
- IS 6-Bolt disc mount fits many brake rotors.
- 3-Cross lacing for good strength and durability.
- Standard 100mm hub spacing fits a wide variety of forks.
$52.00
- Durable double wall rim from Inspired.
- As fitted to the Inspired Flow bikes.
- Double wall, high quality aluminum construction for maximum strength and stiffness.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- 32mm wide profile.
- Suitable for disc or rim brake use, its parallel sidewalls make it ideal for street trials bikes with rim brakes.
- Black anodized finish with laser etched Inspired logo.
- 32h spoke drilling only.
$65.00
- Designed for street riding use, the Team rim offers an excellent strength to weight ratio.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Double wall construction offers good strength and stiffness.
- 20mm holes drilled in the rim help to reduce weight.
- 36mm wide profile helps to prevent tire roll when compared to similar rims available.
- Matte white powder coat finish with black logos.
- Available in 32h spoke drilling only.
$75.00
- The updated Inspired Pro V2 rim offers excellent strength and value for street trials.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- Un-drilled double wall construction is very stiff and strong, ideal for street riding.
- 36mm wide profile gives good anti-roll performance even at low tire pressures.
- For use with disc brakes only.
- Available in gloss black anodized finish with white Inspired graphics.
- 32h spoke drilling only.
$80.00
- The Inspired Pro V2 rim offers excellent strength and value.
- Updated V2 version tested and proven by John Langlois.
- Double wall angular profile for increased strength and stiffness.
- Un-eyeletted construction saves over 50g when compared with eyeletted rims.
- 36mm width gives good anti-roll performance even at low tire pressures.
- Available in gloss black anodized finish with white 'Inspired' graphics.
- For use with disc brakes only.
- 32h spoke drilling only.
- Not tubeless compatible.
$115.00
- Top quality sealed bearing rear disc hub, as found on Inspired Pro spec bikes.
- CNC-machined hub shell features more material in high stress areas to improve durability.
- Machined disc side flange reduces weight without compromising strength.
- Threaded section uses a conventional 1.37" x 24tpi, suitable for use with 16t (and larger) screw-on freewheels.
- ISO disc mount is compatible with all 6-bolt disc rotors.
- Fully sealed cartridge bearings provide silky smooth performance in all conditions.
- Available with either 10mm bolt-in axle or 12mm through axle options, both with 135mm spacing.
- 10mm bolt-in version uses a hollow aluminium axle, with M6 steel axle bolts. Compatible with all Flow and Fourplay/Hex (2019 and earlier) frames.
- 12mm version is compatible with Fourplay (2020 onwards) and Hex (2020 onwards) frames, along with all Skye frames.
- Available in anodized black with laser etched Inspired logos.
- 32h drilling only.
$265.00
- Hope's Pro 4 Trials/Singlespeed hub has become the rear hub of choice for many street trials riders the world over.
- Machined from forged 2014 T6 aluminum billet.
- 4-pawl ratchet mechanism gives 88 engagement points which ensures a quick, solid pedaling response.
- 6-speed steel cassette body (spacers included to convert to single speed) increases durability and makes it harder for cogs to dig into it under trials forces.
- 6 bolt International Standard disc mount.
- Sealed stainless steel cartridge bearings.
- 10mm steel axle bolts (fitted for 8mm allen key) and serrated washers included with bolt-on version.
- Conversions available for QR axles.
- Compatible with 135mm spaced frames.
- Not supplied with spacer lockring.
- Available in 32 hole spoke drillings in black.
- Sold in 135 x 10 bolt on and 135 x 12mm thru-axle versions.
- Available to special order in other configurations including 36 hole drilling and other colors, please contact us for time frame and further info.
$4.00
- Replacement bearing for Echo TR 116mm and 135mm rear hubs.
- Double seals keep out dirt and water for smooth running.
- Also fits some other manufacturers hubs.
- ID: 10mm OD: 26mm Width: 8mm
- Sold individually.
$6.00
- Durable rim strips from Echo.
- Made from strong yet light plastic.
- Heat-bonded join.
- Available in white only with printed Echo logos.
Widths:
- 28 mm for all front wheel sizes (20", 24", 26")
- 32mm for 24" rear
- 35mm for 19" and 26" rear.
Please Note: width can vary a few mm from strip to strip.
$50.00
- Echo's lightweight front rim as found on their complete bikes.
- Constructed from high quality 6061 T6 aluminum.
- Un-eyeletted to save weight.
- 38mm width provides stability and helps prevent tire roll.
- Single wall design with large machined holes saves weight and removes material where it isn't needed.
- Available in 32 hole only.
- Anodized black or red.
$56.00
- Echo's new lightweight front 24" rim as seen on their complete bikes.
- Constructed from high quality 6061 T6 aluminum.
- Un-eyeletted to save weight.
- 38mm width provides stability and helps prevent tire roll.
- Single wall design with large machined holes saves weight and removes material where it isn't needed.
- Available in 32 hole only.
- Anodized black.
$60.00
- Fixed non-disc rear hub from Echo.
- Aluminum hub shell and axle keep weight down.
- Sealed bearings provide smooth, durable running.
- Standard 1.37" x 24tpi threads to accommodate threaded cogs.
- Spaced for use with 116mm frames without snail cams.
- Supplied with steel bolts and washers.
- International Standard rotor bolt pattern.
- 32h drilling only.
- Anodized black finish with laser-etched logos.
$70.00
- 10mm CroMo steel axle for maximum durability.
- High quality 6061 T6 aluminum hub shell.
- Sealed bearings provide reliable and smooth operation.
- Features a splined interface for easy installation and removal of cogs.
- Cog is held in place by a threaded lockring supplied with hub.
- Compatible with Echo V2 splined cogs only.
- New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit.
- Anodized black finish with laser-etched logos.
- Supplied with steel bolts and washers.
- Spaced for use without snail cams.
- Available in 32 hole drilling only.
$75.00
- Lightweight 19" rear rim from Echo.
- Constructed from high quality 6061 T6 aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 48mm width provides excellent stability and helps prevent tire roll.
- Large parallelogram holes keep weight to a minimum.
- New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls.
- Supplied with matching Echo rim strip.
- Available in 32 hole spoke drilling only.
- Anodized black finish with Echo logos around valve holes.
$80.00
- 10mm CroMo steel axle for maximum durability.
- High quality 6061 T6 aluminum hub shell.
- Sealed bearings provide reliable and smooth operation.
- Features a splined interface for easy installation and removal of cogs.
- Cog is held in place by a threaded lockring supplied with hub.
- Compatible with Echo V2 splined cogs only.
- New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit.
- International Standard 6-bolt rotor mount.
- Anodized black finish with laser-etched logos.
- Supplied with steel bolts and washers.
- Spaced for use without snail cams.
- Available in 32 hole drilling only.
$0.12 - $0.20
- DT's standard brass nipples.
- The nipples of choice for most of our trials wheelbuilds here at the shop.
- Stronger and more resistant to rounding off than alloy nipples.
- Available in black or silver.
$0.25 - $0.65
- DT's alloy nipples are a lighter weight alternative to standard brass nipples.
- Great for a lightweight wheelbuild or one that needs some color.
- About 25g per wheel lighter than brass nipples!
$0.75 - $1.00
- DT Champion spokes are affordable, strong straight gauge spokes.
- Great for durable wheel builds.
- 2.0mm thickness
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$1.20 - $1.60
- Lightweight butted spokes from DT Swiss.
- Lighter than straight gauge spokes without sacrificing strength.
- Butted construction with 2.0 width at the ends and 1.8 in the middle.
- Cold forged for extra durability.
- Available in black or silver.
Please Note: If you are unsure what length spokes you need, please contact us.
$70.00
- Lightweight 20" front rim from French brand Crewkerz.
- Constructed from high quality aluminum for improved durability and brake performance.
- Un-eyeletted design and single wall construction save weight.
- 31mm width provides good stability and helps prevent tire roll.
- "H" shaped rim profile improves strength and stiffness of sidewalls.
- Custom rectangular holes reduce weight.
- Large 9.5mm sidewall area for good brake pad contact.
- Available in 32 hole spoke drilling only.
- Anodized black finish.
$84.00
- Danny MacAskill's signature tire from well known mtb brand Continental!
- Developed by Continental with direct input from Danny MacAskill and fitted to the top end Inspired Team bikes.
- Interconnected tread pattern helps keep rolling resistance low whilst the unique angled block design and spacing give maximum grip when needed.
- Constructed from Continental's high performance Black Chili compound that provides a combination of excellent grip and high durability.
- Thicker sidewalls to help reduce the chance of punctures.
- Folding Kevlar bead helps to minimize weight.
- Available in 24" x 2.4" size only.
Please Note: This tire fits extremely tightly on Inspired Team V2 rims. Inflating the tire too high when trying to seat the bead can cause damage to the bead and/or casing. Because of this, Inspired recommends not seating the bead when using these tires in combination with the Team V2 rims.
$2.00
- Replacement steel bolt
- M6 x 25mm size
- 5mm allen key head
- Ideal for hub axle bolts
- Sold singly
$6.00 - $8.99
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Presta valve is the longer, skinnier valve than the standard schrader.
$6.00 - $9.50
- Spare tubes for your trials bike.
- A must have for any trials rider.
- Schrader valve is the same type of valve you would find on your car.
Previous page
Page 2 of 2