Write a Review
$30.00 - $65.00
- Stiff nylon bristle brush from Swix.
- Brush for 10 strokes.
- When applying fluorinated waxes using two-step ironing, these brushes are used to “brush up” the powder between the two ironing steps.
$25.00 - $60.00
- Polish brush for all waxes from Swix.
- Brush for 5 to 10 strokes.
- Available in small rectangular brush or large oval brush with strap.
$20.00 - $60.00
- This brush is the first brush used after scraping.
- Medium coarse bronze bristles.
- Use for 10 strokes.
- Available in a small, pocket sized version, medium rectangular, and large oval with strap.
$30.00 - $65.00
- Ideal for use before each waxing.
- Can also be used as first brush after waxing.
- Coarse bronze bristles.
- Row of softer nylon bristles around the outside edge as “sweepers” for wax particles.
- Brush for 10 strokes.
- Available in rectangular or oval (with strap).
$37.00 - $38.00
- Synthetic nylon bristle roto brush from Solda.
- Available in 100mm and 120mm sizes.
$250.00
- The Swix T793-2 is a lightweight aluminum nordic waxing profile.
- Provides good stability and nearly full-length support for tuning and waxing XC classic, skating and touring skis.
- Used in the Webskis waxing workshop!
- The tip and tail supports easily slide along a fixed aluminum rail to accommodate skis from 140cm to 210cm.
- Included midpoint clamp snaps into the binding (same dimensions as a boot bar) and slides along a track to the desired location.
- Profile can be clamped to a bench or waxing table using the Swix T790-K Clamps.
$30.00
$50.00
40% Off
- Structure rollers from Swix for older T403 structure tools.
- They do not have bearings on them like the T423.
- Sold individually.
$50.00
- Structure rollers from Swix for the T423 structure tool.
- Bearings included.
- Sold individually.
$25.00
- Handy wall rack for skis that can be easily transported.
- Holds up to 8 pair of nordic skis or 4 pairs of alpine skis.
- Simply attach to a wall, stand your skis up, and strap them in.
$160.00
- This lightweight, steel frame design table from Swix.
- Portable and easy to travel with .
- One leg is height adjustable for uneven floors.
- Red steel frame with black laminate top.
- Top dimensions: 120 x 35 x 84-89cm (47 x 14 x 33-35in)
$10.00
- Classic plexi scraper from Solda.
- 4mm thick plexi-glass is durable and excellent for removing wax from bases.
$6.00
- Our custom Webskis/Webcyclery shop scraper.
- 3.5mm thick.
- Hole so it can be hung for convenient storage.
$56.00 - $58.00
- Fine, soft brass bristle roto brush from Solda.
- Use for freshening bases with fine grind before waxing.
- Also for the first brushing of cold waxes after scraping cold bases that have a fine structure.
- Available in 100mm and 120mm lengths.
$55.00 - $60.00
- Solda roto brush handles let you speed up the waxing process.
- Allow for faster waxing of skis than hand brushes.
- Made for use with a variable speed hand drill.
- Bearing-based spindle gives smooth operation and improved durability.
- Designed for use with 120mm brushes.
- These can also be used with 100mm brushes by cutting a small, 20mm spacer from a piece of PVC pipe and putting it on the the spindle next to the handle.
$50.00 - $52.00
- This brush is for the final touches on most wax jobs.
- Soft felt will remove the last of the excess wax and leave a beautiful, polished finish behind.
- Available in 100mm and 120mm lengths.
$30.00
- Simple snow thermometer from Swix.
- Includes protective case.
- Temperature gauge from -30°C to 50°C.
$22.00
- Protect your clothes when waxing while wearing this Solda apron.
- Black, high quality apron has two front pockets to hold your tools.
- Made of a poly/cotton blend, it is easily washable.
- Also great for use in the kitchen.
$37.00 - $39.00
- Natural/synthetic hybrid bristle roto brush from Solda.
- Use this brush to remove medium to warm waxes after scraping.
- It will also polish base surface like a shoeshine brush.
- Abrasive yet safe on base structures.
- Available in 100mm and 120mm lengths.
$42.00 - $44.00
- Fine, natural fiber roto brush from Solda.
- Use this brush as the final polish brush for any waxes.
- We use this brush to finish our race day fluorocarbon top coats.
- Neutral electro/static charge.
- Available in 100mm and 120mm lengths.
$6.00
- What the Italians use to get the sticky klister wax residue off of their hands.
- This stuff is amazing, a little goes a long way and it really works.
- Comes in a 75ml tube.
$60.00 - $90.00
- High quality steel brush with an excellent reputation in racing.
- Great for cleaning bases of old wax.
- Also good for first brushing after scraping.
- Brush for 5-6 strokes.
- Significantly nicer than the steel brush you use to clean your bbq grill.
$70.00
- Swix fine steel brush is ideal for cleaning out the structure before waxing.
- Ultra fine 0.10 mm bristles go deep into the base structure to clean and refresh the base.
- Can also be used as second brush after waxing.
- Use 4 to 5 strokes.
- This brush should only be used in one direction, Tip to Tail of ski.
- Do not brush back and forth on ski base.
$26.00
- A slightly stiffer brush than the standard nylon.
- A combination of stiff nylon and soft horsehair bristles.
- Use this after scraping for removing warm waxes from coarse base structures.
- If you are looking to own just one brush and live in a climate where you have lots of medium to warm snow, this could be the choice.
$25.00 - $34.00
- Classic nylon hand brush from Solda.
- For many skiers this could be your only brush.
- Use this brush to remove waxes from most base grinds after scraping.
- Will not damage structures.
- Medium brush bristles made from durable synthetic nylon fibers.
$30.00 - $38.00
- Designed for the final brushing for cold waxes and all fluorinated waxes.
- Soft horsehair bristles gently expose the base structure.
- Oval brush features a strap to help control the tool and produce a glossy finish and fast skis.
- Can also be used for brushing out cold waxes on fine structures if you don’t have a fine brass brush.
- We always use this to finish our race day wax fluorocarbon top coat.
- Fine, natural fibers with neutral electrostatic charge.
- Available in a standard hand brush and large oval brush w/strap.
$25.00
- Soft felt brush from Solda.
- Curved sides for a comfortable grip.
- Use this brush for polishing fluorocarbons after corking for the fastest skis possible!
$32.00 - $45.00
- Fine, soft brass bristle brush from Solda.
- Use for freshening bases before waxing.
- Also a good first brush for cold waxes on a ski with a fine grind.
- Make 2-3 passes with the brass brush after scraping all cold/hard waxes, then continue with nylon or nylon/horsehair and finish with horsehair brush.
- Oval brush has an outer ring of nylon bristles.
- Available in rectangular or oval (with strap).
$37.00 - $40.00
- High quality cork roller from Solda.
- No seams for smooth operation and polishing.
- Great for fluorocarbon application.
- We use this after ironing powders, after rubbing on fluoro blocks or after spray-on fluoros have dried.
- Available in 100mm and 120mm lengths.
$24.00
- One of our favorite brushes in the Solda line.
- Use this for cold application and polishing fluorocarbon top coat waxes.
- Work back and forth with medium hard strokes to create friction and force fluorocarbon powders or block applied waxes into the bases.
- Natural cork working surface.
- Curved sides for a comfortable grip.
$10.00 - $64.00
- When you really want to clean your skis and polish them up, the Swix Fiberlene cloth is what you need.
- To be used between iron and base.
- Protects the base from overheating colder waxes.
- Absorbs dirt and excess wax, and leaves a thin and uniform wax layer.
- Available in 20m roll in 140mm width, and 40m and 200m rolls in 285mm width.