Wheels

- Pre-built front 20" disc wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim. - 3-Cross lacing for good strength and durability. - Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.

- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.

- Pre-built front 24" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim. - IS 6-Bolt disc mount fits many brake rotors. - 3-Cross lacing for good strength and durability. - Standard 100mm hub spacing fits a wide variety of forks.

- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.

- Jitsie's superlight 116mm disc hub from their race range of components. - Designed with input from multiple time World Champion Dani Comas. - Manufactured in Belgium. - 116mm spacing fits most 20" frames and some 24"/26" frames. - Fully sealed cartridge bearings offer smooth and reliable running and protect against dirt and water. - Uses a custom designed, CNC machined 7075 aluminum tapered shell to minimize weight. - Features a hollow aluminum axle, further reducing weight. - Minimalist disc mount saves weight by removing material while improving strength by connecting directly to the flange. - Precision threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Black or Red anodized finish with Jitsie laser etched logos. - Supplied with steel bolts and Jitsie's superlight low profile aluminum washers. - Spaced for use with snail cams (110mm + 3mm axle spacing for each snail cam). - 32h spoke drilling only.