Hubs

Originally designed and made by Chris McGovern of McGovern Cycles, the Drive Thru is a dummy hub, or chain keeper that replaces your wheel while cleaning the chain. It is fast and an effective way to clean your chain in between races or in your garage. It allows you to fully rotate your cranks and shift through your complete range of gears while protecting the frame. Installs simply with one hand, and is quick and easy to change between bikes. The Drive Thru is also great or packing the bike for transport! - For cleaning your chain anywhere, any time. - Short dummy axle allows for quick, one-handed installation and easy chain placement, as you only need to thread into the drive side dropout. - Chain can be easily added on or removed from pulley. - Knurled axle stud head is easy to finger tighten with cold/greasy/oily hands. - Pulley is captured on the dummy axle with the O-ring, or can be quickly removed to fit flat in a toolbox. - Weight: 0.3 lbs

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - Lightning is Better. Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile and lighter weight option to replace your stock thru-axles. - Low Profile. No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight. Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install. Our matching front and rear Lightning Bolt-On Axles only require a standard 6 mm hex wrench for easy installation and removal. - Better Tolerances. Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. - No longer will your axle loosen while riding. - The axle is precision CNC machined in the USA from 7075 aluminum and hard anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for installation or wheel removal using your standard 6mm hex wrench. - Designed, built and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle we needed a better option. Our Lightning Bolt-On thru axles offer the highest quality, simple, lightweight alternative to that bulky handle. - Lightning is Better. Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile and lighter weight option to replace your stock thru-axles. - Low Profile. No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight. Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install. Our matching front and rear Lightning Bolt-On Axles only require a standard 6 mm hex wrench for easy installation and removal. - Better Tolerances. Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. - No longer will your axle loosen while riding. - The axle is precision CNC machined in the USA from 7075 aluminum and hard anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for installation or wheel removal using your standard 6mm hex wrench. - Designed, built and quality tested in the USA. Proven around the world.

These bobbins are made by the Robert Axle Project to complete our axles for compatibility with the BOB Trailer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. Keep in mind it is always a good idea, on any significant tour, to carry a spare Bobbin and Trailer Pin, just in case. Sold in pairs. Manufactured from 303 Stainless Steel. Includes stainless steel hardware for attaching to axle.

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

End caps for front conversion hubs.

SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs

Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs

12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.