Write a Review

- High quality sealed rear disc hub from Trialtech. - 135mm spacing, to fit the majority of modern trials and street frames. - International standard 6-Bolt disc fitting. - Threaded (1.37" x 24 tpi) section ready to fit a freewheel or fixed sprocket. - Fully sealed cartridge bearings offer silky smooth running no matter what conditions you ride in. - Hollow 10mm axle with internal threads to take allen key bolts (the axle may also be used with a traditional quick release skewer for easy removal of the wheel, but bolts and washers supplied as standard). - Serrated end caps and bolt washers help keep the bolts tight and the hub in place. - CNC machined aluminium shell. - 32h drilling. - Available in gloss black with laser etched Trialtech 'bashring' logo.

- The Inspired Pro V2 rim offers excellent strength and value. - Updated V2 version tested and proven by John Langlois. - Double wall angular profile for increased strength and stiffness. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - 36mm width gives good anti-roll performance even at low tire pressures. - Available in gloss black anodized finish with white 'Inspired' graphics. - For use with disc brakes only. - 32h spoke drilling only. - Not tubeless compatible.

- Top quality sealed bearing rear disc hub, as found on Inspired Pro spec bikes. - CNC-machined hub shell features more material in high stress areas to improve durability. - Machined disc side flange reduces weight without compromising strength. - Threaded section uses a conventional 1.37" x 24tpi, suitable for use with 16t (and larger) screw-on freewheels. - ISO disc mount is compatible with all 6-bolt disc rotors. - Fully sealed cartridge bearings provide silky smooth performance in all conditions. - Available with either 10mm bolt-in axle or 12mm through axle options, both with 135mm spacing. - 10mm bolt-in version uses a hollow aluminium axle, with M6 steel axle bolts. Compatible with all Flow and Fourplay/Hex (2019 and earlier) frames. - 12mm version is compatible with Fourplay (2020 onwards) and Hex (2020 onwards) frames, along with all Skye frames. - Available in anodized black with laser etched Inspired logos. - 32h drilling only.

- Classic 19" rear trials tire from Maxxis. - Designed specifically for trials use with input from World Champion Dani Comas. - Super Tacky rubber compound provides good grip while also maintaining good durability. - Traditional block style tread is designed to work in both directions. - Wire bead. - Available in 19 x 2.5 size. Please note: This tire is marked as 20" x 2.50, but it fits only a 19" rim. It will not fit 20" rims.

- Pre-built rear 24" disc rear wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 116 Disc rear hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 32h rim. - 3-Cross lacing for good strength and durability. - Spaced for use with 116mm frames using snail cams. - Jitsie hub spacers (sold separately) can be added for use with 116mm frames that do not use snail cams. - IS 6-bolt disc hub is compatible with all 6-bolt rotors.

- Pre-built front 24" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 24" 28h rim. - IS 6-Bolt disc mount fits many brake rotors. - 3-Cross lacing for good strength and durability. - Standard 100mm hub spacing fits a wide variety of forks.

- Lightweight but durable non-disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Lightweight 20" front rim from French brand Crewkerz. - Constructed from high quality aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 31mm width provides good stability and helps prevent tire roll. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Custom rectangular holes reduce weight. - Large 9.5mm sidewall area for good brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish.

- Pre-built front 26" wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc or HS front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 26" 28h rim. - IS 6-Bolt disc mount on disc wheel. - 3-Cross lacing for good strength and durability on disc wheels. - Radial lacing on non-disc wheels. - Standard 100mm hub spacing fits a wide variety of forks.

- The updated Inspired Pro V2 rim offers excellent strength and value for street trials. - Un-eyeletted construction saves over 50g when compared with eyeletted rims. - Un-drilled double wall construction is very stiff and strong, ideal for street riding. - 36mm wide profile gives good anti-roll performance even at low tire pressures. - For use with disc brakes only. - Available in gloss black anodized finish with white Inspired graphics. - 32h spoke drilling only.

- Pre-built front 20" disc wheel from Jitsie. - Assembled in Belgium by Jitsie's expert wheelbuilders. - Built using Jitsie's 100 Disc front hub, straight gauge black spokes, black alloy nipples, and Jitsie Single Wall 20" 28h rim. - 3-Cross lacing for good strength and durability. - Standard 100mm spacing and IS 6-bolt disc hub configuration fit a wide variety of forks.

- Lightweight 19" rear rim from Echo. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Large parallelogram holes keep weight to a minimum. - New rim profile features a small ridge at the edge of the rim to improve strength and stiffness of sidewalls. - Supplied with matching Echo rim strip. - Available in 32 hole spoke drilling only. - Anodized black finish with Echo logos around valve holes.

- Lightweight but durable disc front hub from Jitsie. - CNC-machined from high grade aluminum for excellent durability. - Sealed bearings protect against dirt and water and ensure smooth running. - 100mm spacing to fit nearly all modern trials forks. - Alloy axle keeps weight to a minimum. - Standard 6-bolt disc mount. - Serrated axle bolt washers for a secure fit in the dropout. - Supplied with steel bolts and lightweight alloy spacers. - Available in anodized black with laser-etched Jitsie logos. - 28h spoke drilling only.

- Designed completely from scratch by Trialtech to provide a new level of stiffness and rigidity in trials rims whilst maintaining the lowest possible weight. - Tested and developed in competition by World Champion Jack Carthy and on street by Joe Prattley. - Unique un-drilled double wall design gives unrivaled strength and stiffness compared to competitor’s single wall rims (up to 3 times more lateral stiffness!). - Custom butted center section adds strength around the spoke holes for improved durability. - 31mm wide profile gives a good balance of low weight and tire performance. - Sleeved joint helps maintain concentricity and maximizes strength. - Available in sandblast black anodized finish with Carthy Signature laser etched logos. - Available in 28h or 32h spoke drilling. - For use with rim or disc brakes.

- Lightweight rear tire from Jitsie. - Developed and tested by Jitsie team riders Nico Vallee and Rafa Tibau. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 26 x 2.5" size.

- Replacement thru-axle for Crewkerz hubs. - Compatible with Crewkerz frames and forks only. - High quality aluminum construction. - Fitting for T-40 Torx wrench for easy adjustment and less chance of stripping than a standard allen key fitting. - Available in 9mm front or 12mm rear. - Anodized red finish. - Sold individually.

- Superlight rim tape from Jitsie. - Extremely light nylon material is still strong enough to resist tearing and bubbling. - Significantly lighter than competitor's rim tapes. - Strong heat bonded join with hole for all valve types. - Silver/grey with printed Jitsie logos on one side and plain blue finish on the other. - 30mm front width, 42mm rear width.

- Affordable 20" tire from Jitsie. - Good mix of durability and performance. - Works well as a front tire on adult bikes as well as front or rear on kids bikes that use a 20" rear wheel. - Classic block tread pattern grips well on all surfaces. - Tire is designed to work in both directions. - Sticky rubber compound ensures good grip. - Wire bead keeps cost down and ensures a secure fit with the rim. - Available in 20 x 2.25 size. Please Note: Tires may not have Jitsie logos.

- Super lightweight 20" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28h and 32h spoke drilling. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Lightweight 19" rear tire developed by OBR (Owned By Riders). - Tested and used by many top UCI riders including Abel Mustieles. - Unique tread pattern is a mix of several other common designs to provide excellent grip in all conditions. - Widely spaced knobs shed mud well while still being aggressive enough for good traction loose terrain. - Super sticky lightweight rubber compound for maximum grip. - Siping on center tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Large volume casing provides excellent bounce. - Wire bead for a secure fit. - OBR logos on sidewalls. - Available in 19 x 2.6" size.

- Lightweight 20" front tire developed by OBR (Owned By Riders) to compliment their Gekok 19" rear tire. - Unique diamond-shaped tread pattern grips well on all surfaces without adding unnecessary rolling resistance. - Widely spaced knobs shed mud well. - Super sticky lightweight rubber compound for maximum grip. - Low block tread design helps save weight. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - OBR logos on sidewalls. - Available in 20 x 2.0" size.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- 10mm CroMo steel axle for maximum durability. - High quality 6061 T6 aluminum hub shell. - Sealed bearings provide reliable and smooth operation. - Features a splined interface for easy installation and removal of cogs. - Cog is held in place by a threaded lockring supplied with hub. - Compatible with Echo V2 splined cogs only. - New axle spacers feature integrated bearing covers to help keep the bearings free of dirt and grit. - International Standard 6-bolt rotor mount. - Anodized black finish with laser-etched logos. - Supplied with steel bolts and washers. - Spaced for use without snail cams. - Available in 32 hole drilling only.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance and low weight. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Folding bead. - Jitsie logos and product info on tire. - Available in 20 x 2.0 size.

- Replacement bearing for Echo TR 116mm and 135mm rear hubs. - Double seals keep out dirt and water for smooth running. - Also fits some other manufacturers hubs. - ID: 10mm OD: 26mm Width: 8mm - Sold individually.

- Developed and tested by Jitsie team riders Dani Comas and Alejandro Montalvo. - Good mix of durability and performance. - Exclusive Jitsie tread pattern ensures maximum grip and minimal rolling resistance. - Tire is designed to work in both directions. - Super sticky lightweight rubber compound ensures maximum grip. - Low block tread design helps save weight. - Generous spacing between center and outer knobs helps shed mud. - Siping on tread blocks reduces weight further as well as improves grip by allowing the blocks to conform to uneven surfaces. - Wire bead. - Jitsie logos and product info on tire. - Available in 19 x 2.6 size.

- Super lightweight 26" front rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 33mm width provides good stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 28 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 26" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 24" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.

- Super lightweight 19" rear rim from Jitsie. - Constructed from high quality 6061 T6 aluminum for improved durability and brake performance. - Un-eyeletted design and single wall construction save weight. - 48mm width provides excellent stability and helps prevent tire roll. - Custom large parallelogram holes keep the weight to a minimum. - "H" shaped rim profile improves strength and stiffness of sidewalls. - Large sidewall area for maximum brake pad contact. - Available in 32 hole spoke drilling only. - Anodized black finish with Jitsie stickers around valve holes. Please Note: Due to the profile of these rims, the ridge near the spoke holes can make it difficult to fit a spoke wrench on standard length nipples. Because of this, we recommend lacing these rims with 14mm or 16mm long nipples.