Skip to main content

Write a Review

$30.00
- High performance replacement brake pads for hydraulic rim brakes. - Good braking performance in wet and dry conditions. - Red pad material gives great bite and hold in dry conditions when used in conjunction with a light grind. - For maximum performance in wet weather, use a slightly deeper, harsher grind. - 7.5mm of pad material gives great wear life. - Fitted with tough plastic backings to give great value for money. - Sold as a pair (for one brake).
$8.00
- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.
$37.00 - $41.00
- The Magura Storm HC rotor is precisely machined for predictable braking under extreme forces. - Constructed from durable steel. - Optimized friction performance for better stopping power. - Standard 6-Bolt IS bolt pattern. - Compatible with all Magura MT series disc brakes.
$15.00
- Replacement brake lever piston for Trialtech rim brake levers. - Precision injection molded using low water absorbtion plastic. - Available with Sport or Carthy specification seals. - Carthy piston made with UK made primary hydraulic seal and custom UK made scraper/wiper seal to prevent dirt ingress. - Compatible with both Sport and Carthy lever models. - Sold individually.
$38.00 - $46.00
- High quality brake bleed kit from Hope Technology. - Comes with detailed step by step bleeding instructions. - Clever design uses a lever specific reservoir bleed cap that the easy bleed fluid cup threads into, eliminating the need to refill the reservoir during the bleed process, allowing you to bleed the brake quicker with less mess. - DOT fluid sold separately. - Kit includes: flexible vent tubing, bleed port fitting, lever specific reservoir cap with rubber seal and mounting screws, easy bleed fluid cup with stopper, and instructions. - Some kits are now available with Dot 5.1 fluid. Please see drop down menu for options.
$15.00 - $16.00
- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.
$18.00
- High performance CNC rim brake pad refills from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair.
$31.00
- Replacement HS33 brake lever blade from Magura. - Fits 2014 and newer Magura HS33 rim brakes only, will not fit Magura disc brakes. - Longer 4-finger lever provides more power over the standard 2-finger lever. - Supplied with TPA kit. - Available in anodized black only.
$48.00
- High performance CNC rim brake pads from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - Glued to Jitsie's newly designed CNC backing, which is shaped to provide a precise fit with the brake caliper to eliminate the pad "knock" often found with plastic-backed pads. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - Compatible with all hydraulic rim brake systems on the market including Magura, Echo, and Racing Line. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair. Please Note: Due to the super stiff characteristics of the metal backings, it is important to set up these pads so that they are completely square with the rim. Otherwise they will wear unevenly, leading to decreased brake performance and pad life.
$3.00
- Replacement Magura compression sleeve nut, also known as a shroud nut. - Allows a standard hose to be fitted to levers using a new olive. - Compatible with 2014 and newer Magura HS33 levers as well as Magura MT disc brake levers. - NOT compatible with any pre-2014 Magura levers.
$85.00
- Quality, affordable rim brake lever from Trialtech. - Forged main body and blade with precision CNC machined features. - Ergonomic blade shape feels supportive and comfortable with a wide range of reach adjustment. - 13mm piston and carefully selected leverage ratios allow a shorter and stiffer blade to be used without a loss in overall power. - Replaceable pivot pin features locking grub-screw and unique hidden ‘backup’ securing system. - Injection molded piston using tough, low moisture absorbing engineering plastic specifically designed for use with Trialtech brake fluid. - Fitted with two UK made seals. - Optimal bleed port position, air always rises to the bleed port exit, helping improve fluid change ease and quality. - Low profile ‘leg-saver’ clamp using a custom forged 7075 bolt. - Optimal main hose exit angle helps prevent tangled and damaged hoses. - Custom extra-tough M6 cr-moly bleed blanking screw. - Left or right side specific but can be flipped in urgent situations (the pivot pin should be turned around for added security). - Compatible with all slave cylinders on the market. - Designed for use with Trialtech brake fluid but is also compatible with mineral oil. - Supplied with both a custom bleed hose and a Trialtech Barbed Fitting. - Anodized black with stylish and subtle 'Sport' laser logos.
$1.00
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.00
- Disc brake caliper mounting bolt from Magura. - Steel construction for maximum durability. - M6 x 16mm size is ideal for disc brake mounting bolts, but also works for other applications. - Head fitted for 5mm allen key. - Pre-applied loctite helps keep bolts secure. - Sold singly.
$250.00
- Hope's proven Trial Zone caliper combined with their adjustable Tech 3 lever. - Spec'd on many high end Inspired bikes. - Smoother, more predictable modulation than traditional cable disc brakes. - Tech 3 lever offers tool-less bite point and reach adjustment to customize brake performance and lever feel. - Lever is CNC machined from a solid billet of 2014 T6 aircraft spec aluminum alloy, giving smooth, progressive feel and power. - Features a split clamp lever for easy fitting and removal. - Integrated reservoir for easy bleeding. - Lever blade has multiple holes drilled in it to improve grip on the lever and save a few extra grams. - Kevlar reinforced black hose keeps weight down while maintaining flexibility and durability. - One piece Post Mount caliper is CNC machined from a solid billet of 2014 T6 aircraft spec aluminum alloy. - Super rigid trials specific caliper houses 2 huge 25mm aluminum pistons that provide both power and stiffness for the most efficient clamping of the disc. - Magnetic pad holders to aid pad clearance from the rotor. - Pad retention pin threads into the caliper body and uses a clip for maximum security. - Lever and caliper are anodized with a durable black finish and laser-etched graphics to withstand weather, cleaning and general use. - Supplied fully bled and ready to be installed. - Designed for use with Hope Trial Zone rotor, also compatible with some others such as Echo TR rotor. - Rotor and adaptor sold separately. Please Note: This brake is supplied standard as a left-front lever, but can also be ordered in left-rear (moto style). Please call for details.
$55.00
- New design Trial Zone rotor based on the popular original version. - Laser cut from a sheet of custom steel for fantastic durability. - Optimized for maximum pad friction at low speeds. - Large braking surface provides instant grip and hold. - Designed specifically for trials use. - Straighter arms than previous version for improved strength and stiffness and to withstand braking forces in both directions. - Compatible with Hope Trial Zone, Tech Trial, and Mono Trial brakes, plus others. - Standard 6-bolt mounting pattern is compatible with nearly all trials hubs. - Supplied with rotor bolts. - Available in 160mm and 180mm.
$6.00
- Replacement set of rotor bolts from Avid/Sram. - Constructed from durable steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.
$8.00
- CNC-machined aerospace grade aluminum booster spacers from Trialtech. - Unique "top hat" design to prevent the spacer being crushed into the bolt slot and/or damaging your booster. - Fits standard M5 brake clamp bolts. - Available in anodized black only. - Supplied as a pair.
$4.00
- Replacement barbed fitting for Magura, Echo and Racing Line brakes, Trialtech Sport hose splitters and other brand brake levers. - High quality CNC-machined Cr-moly steel construction. - Second barb is slightly larger diameter to provide a secure fit and better seal. - Shorter threaded section than standard Magura barbs, making them ideal for use with bleed hoses. - M6 x 1mm thread. - Tough black finish. - Sold singly.
$6.00
- Quality bleed hose for hydraulic rim brakes. - M6 fitting for Magura HS33, Racing Line, Tensile and Echo brakes. - Can be used as an inlet or outlet hose. - Supplied with Trialtech barbed connector fitted to a 23cm long hose. - Ideal for use with Trialtech bleed syringes. - Sold individually.
$5.00 - $6.00
- High quality syringes for bleeding hydraulic rim brakes and some models of disc brake. - Precision 2-piece design avoids sticking issues caused by swelling seals often encountered with other syringes. - Available in Large (60ml) or Small (24ml) volume. - Sold individually.
$36.00
- Excellent value for money rim brake bleed kit. Kit includes: - 1 500ml Trialtech rim brake fluid - 1 60ml syringe - 2 bleed hoses with barb fittings
$55.00 - $110.00
- Replacement slave cylinders from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum piston eliminates swelling when the brake is bled with water, a common problem with the plastic pistons found in Magura slave cylinders. - Compatible with Magura, Echo, and Racing Line brakes. - Available in M6/M8 and M8/M8 configurations, allowing the use of a shroud nut and olive at each end of the cross-over line, making it easier to repair or replace should you damage one mid-ride. - Includes 2 rainbow titanium shroud nuts, olives, and covers for M8/M8 version and one rainbow titanium shroud nut, olive, and cover and one bleed bolt for M6/M8 version. - Available in anodized black, sold individually or in pairs.
$4.00
- Replacement bleed bolt for 2016 Racing Line levers and brakes. - TC4 titanium construction. - M6 thread. - Fitted for use with Torx T-25 tool. - Fits 2016 Racing Line levers and slave cylinders only, not compatible with Magura or earlier Racing Line brakes. - Maximum torque 3Nm. - Nylon washer not included.
$7.00
- Racing Line grease. - Specially formulated for use with o-rings on Racing Line brakes. - Helps keep o-rings on hydraulic rim brakes sealed and lubricated. - Also works great on bolts and other items requiring grease. - 3g.
$70.00
- High performance rear rotor from Jitsie. - Manufactured from Jitsie's exclusive formulated steel. - 6 bolt international standard fitting. - 162mm size ensures the disc and pad always have a perfect contact area (even when the chain has stretched and the wheel is further back in the dropouts). - Large braking surface with three rows provides exceptional braking power, especially when used with the Jitsie Race pads. - Smaller but more numerous arms oriented in opposing directions give the rotor equal strength when braking forwards or backwards, unlike most other rotors. - Laser-etched logos. - Rotor bolts not included.
$9.00
- High quality replacement aluminum cylinder washers for Magura rim brakes. - Compatible with all brake clamps that require the traditional Magura cylinder washer. - Split design makes setup easier whilst unique O-ring system helps keep each half together when fitting. - Aluminum construction makes the washers more durable than standard plastic washers. - Anodized gloss black finish. - Sold as a pair (for one brake).
$46.00
- M6 SL brake clamps for new GU and Echo frames and forks. - 2 6061 T6 aluminum cylinder washers (4 halves) improve durability and clamping force over traditional plastic washers and allow you to finely adjust the angle of your brake pads. This is especially useful if the brake mounts on your frame are not perfectly square. - Holes machined into the clamps save weight. - Wider slots than standard SL clamps are designed specifically for the M6 bolts used on 2015 and newer GU and Echo Mark Ti frames, will not work with other frames. - Anodized black finish with laser-etched logos on the top clamps. - Includes M6 titanium mounting bolts and washers. - Sold as a pair (mounts for one brake).
$20.00 - $30.00 $26.00 - $30.00 Up to 29% Off
- Trials specific disc brake pads to fit a variety of brakes from Trialtech. - High performance, sintered disc brake pads tested and proven by Trialtech team riders. - Trials specific compound offers excellent performance in both wet and dry conditions. - Available to fit Hope Mono Trial / Tech Trial / Trial Zone / V2 and Echo TR hydraulic disc brakes, Avid BB5 brakes, Avid BB7/Avid Juicy brakes, Avid Elixir/SRAM DB5, Magura MT2/MT4/MT6/MT8, Magura MT5/MT7 or Shimano Saint/Zee brakes. - Supplied as a pair fully packaged with Trialtech stickers enclosed. - Pad retention pin and clip not included.
$3.00
- Replacement brake line for Hope disc brakes. - Constructed from durable yet flexible material. - 5mm external diameter. - Supplied cut to length in 1 foot increments.
$15.00
- An innovative product that helps protect your legs when you hit them on your lever clamps! - Helps lessen the impact of hitting the legs on the lever clamps during riding. - Made of lightweight yet durable material. - Held in place by two velcro straps. - Compatible with all brake levers. - Sold as a pair.
Page 1 of 3 Next page