Write a Review

- Top quality replacement rim brake line from Trialtech. - Lightweight, durable material. - 5mm external diameter. - Available in Black, Blue, Green, Red, White, Yellow and Clear. - Custom printed with Trialtech logos. Silver logos on Black, Blue and Red hose. Black logos on Clear, Green, Yellow and White hose. - Supplied cut to length in 1 meter increments.

- A replacement 4-finger lever from Racing Line for 2005-2010 Magura HS33 brakes. - Longer lever provides more power over the standard 2-finger lever. - CNC'd from 6061 T6 aluminum. - 5mm pivot bolt hole fits 2005-2010 Magura HS33 levers, will not fit Racing Line levers. - Available in anodized red only. - TPA wheel and pin sold separately.

- High quality brake bleed kit from Hope Technology. - Comes with detailed step by step bleeding instructions. - Clever design uses a lever specific reservoir bleed cap that the easy bleed fluid cup threads into, eliminating the need to refill the reservoir during the bleed process, allowing you to bleed the brake quicker with less mess. - DOT fluid sold separately. - Kit includes: flexible vent tubing, bleed port fitting, lever specific reservoir cap with rubber seal and mounting screws, easy bleed fluid cup with stopper, and instructions. - Some kits are now available with Dot 5.1 fluid. Please see drop down menu for options.

- Replacement brake line for Hope disc brakes. - Constructed from durable yet flexible material. - 5mm external diameter. - Supplied cut to length in 1 foot increments.

- Trials specific disc brake pads to fit a variety of brakes from Trialtech. - High performance, sintered disc brake pads tested and proven by Trialtech team riders. - Trials specific compound offers excellent performance in both wet and dry conditions. - Available to fit Hope Mono Trial / Tech Trial / Trial Zone / V2 and Echo TR hydraulic disc brakes, Avid BB5 brakes, Avid BB7/Avid Juicy brakes, Avid Elixir/SRAM DB5, Magura MT2/MT4/MT6/MT8, Magura MT5/MT7 or Shimano Saint/Zee brakes. - Supplied as a pair fully packaged with Trialtech stickers enclosed. - Pad retention pin and clip not included.

- Replacement trials disc pads from Hope. - If your pads have become contaminated or just plain worn out, these are what you need for your Hope brakes. - Includes 2 pads and pad retention pin and clip. - Fits Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes.

- Replacement set of rotor bolts from Avid/Sram. - Constructed from durable steel. - Head fitted for a T25 Torx key. - Supplied with loctite applied to prevent loosening. - Sold as a set of 6 for one rotor.

- New design Trial Zone rotor based on the popular original version. - Laser cut from a sheet of custom steel for fantastic durability. - Optimized for maximum pad friction at low speeds. - Large braking surface provides instant grip and hold. - Designed specifically for trials use. - Straighter arms than previous version for improved strength and stiffness and to withstand braking forces in both directions. - Compatible with Hope Trial Zone, Tech Trial, and Mono Trial brakes, plus others. - Standard 6-bolt mounting pattern is compatible with nearly all trials hubs. - Supplied with rotor bolts. - Available in 160mm and 180mm.

- Replacement piston spring for Trialtech brake levers. - Precision taper wound design for improved function and durability. - Fits Sport or Carthy brake levers. - Sold singly.

- The Jitsie brake clamps are an innovative CNC component from the Belgian manufacturer. - CNC-machined from quality 7075 alloy. - Designed to be used without plastic cylinder washers to improve clamping power and ease of installation. - Clamps feature different heights - 7mm and 9mm. This can be very useful when your frame or fork has very low-profile brake mounts. The clamps can be mounted either side up to adjust how far the cylinders sit above the frame. - Designed and manufactured in Belgium as part of the Jitsie Race range.

- Replacement o-rings for Racing Line levers. - If your lever is starting to leak, new o-ring seals can often give it new life. - Includes 2 large o-rings for the piston and 1 small o-ring for the grub screw.

- The Magura Storm HC rotor is precisely machined for predictable braking under extreme forces. - Constructed from durable steel. - Optimized friction performance for better stopping power. - Standard 6-Bolt IS bolt pattern. - Compatible with all Magura MT series disc brakes.

- Inexpensive replacement pads for Hope and Echo disc brakes. - Fits Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes. - Organic pad material offers good performance in both dry and wet conditions. - Steel back plate for maximum durability. - Great for replacing contaminated or worn out pads. - Pad retention pin and clip not included. - Sold as a pair.

- Hope's proven Trial Zone caliper combined with their adjustable Tech 3 lever. - Spec'd on many high end Inspired bikes. - Smoother, more predictable modulation than traditional cable disc brakes. - Tech 3 lever offers tool-less bite point and reach adjustment to customize brake performance and lever feel. - Lever is CNC machined from a solid billet of 2014 T6 aircraft spec aluminum alloy, giving smooth, progressive feel and power. - Features a split clamp lever for easy fitting and removal. - Integrated reservoir for easy bleeding. - Lever blade has multiple holes drilled in it to improve grip on the lever and save a few extra grams. - Kevlar reinforced black hose keeps weight down while maintaining flexibility and durability. - One piece Post Mount caliper is CNC machined from a solid billet of 2014 T6 aircraft spec aluminum alloy. - Super rigid trials specific caliper houses 2 huge 25mm aluminum pistons that provide both power and stiffness for the most efficient clamping of the disc. - Magnetic pad holders to aid pad clearance from the rotor. - Pad retention pin threads into the caliper body and uses a clip for maximum security. - Lever and caliper are anodized with a durable black finish and laser-etched graphics to withstand weather, cleaning and general use. - Supplied fully bled and ready to be installed. - Designed for use with Hope Trial Zone rotor, also compatible with some others such as Echo TR rotor. - Rotor and adaptor sold separately. Please Note: This brake is supplied standard as a left-front lever, but can also be ordered in left-rear (moto style). Please call for details.

- Lightweight titanium replacement grub screw/blanking bolt for 2005-2010 Magura HS33 levers. - M6 thread size with tapered end fits Racing Line, Magura, Echo CNC, SL and TR rim brakes. - Fitted for a 3mm allen key. - Maximum bolt torque 3Nm! - Sold individually.

- Racing Line has updated their piston design for improved sealing. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Available in 13mm and 14mm sizes. - Includes two O-rings as on the previous design, but two nylon rings have also been added to increase longevity and improve seal. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red

- Lightweight replacement titanium pivot bolt for Racing Line levers. - CNC-machined from titanium. - Compatible with Racing Line FL001 and Nano 28 levers and Freno levers. - T25 Torx fitting on both ends resists rounding out better than allen fittings. - Available in anodized black or gold. - Maximum torque 2.5Nm! - Sold individually.

- The Jitsie Race brake pads set the standard when it comes to braking power. - Metal ceramic sintered pad material. - Equally powerful in dry and wet conditions. - Copper backing plate improves pad contact with piston to help reduce pad "knock". - After extensive testing by the Jitsie team, many riders have found these to out-perform all other Trial Zone pads, including the Hope Pro pads! - Available to fit Hope Mono Trial, Tech Trial, Trial Zone, and Echo TR disc brakes, Jitsie Race disc brakes, Magura MT5/MT7 or MT2 brakes and Shimano MT400 brakes. - Pad retention pin and clip not included.

- Blue compound brake pad refills for TNN Engineering CNC backings. - Blue compound offers excellent control and modulation rather than just On/Off braking while still displaying awesome locking power. - Excels in all conditions including dry, dusty, wet, and muddy. - Require almost no bedding in time and are much quieter than the LGM compound. - Compatible with TNN backings which have recess dimensions of 18mm x 8mm x 4mm, but may fit other manufacturer's backings with a slight modification. - Supplied with detailed fitting instructions and TNN stickers. - Sold as a pair (two individual pad inserts).

- Official replacement pads for Magura HS33 brakes. - Tough plastic backing is light and keeps costs down. - Standard black compound is durable and affordable. - 7mm of pad material for good wear life. - Sold as 2 pairs (4 pads).

- A replacement 4-finger lever for Racing Line brake levers. - Longer lever provides more power over traditional 2-finger levers. - CNC'd from 6061 T6 aluminum. - 6mm pivot bolt hole fits Racing Line brake levers only, will not fit Magura levers. - Available in anodized black only. - TPA wheel and pin sold separately.

- Pre-built crossover hose to fit Magura HS33/HS11, Racing Line and Echo rim brakes. - Comes supplied with top quality Trialtech rim brake fittings and 23cm of Trialtech rim brake hose fully assembled and ready to fit. - Longer than standard hose helps to prevent kinking and reduced performance during use. - Available with either two Trialtech M6 Barbed Fittings, or an M6 Barbed Fitting at one end with a Trialtech M8 Shroud Nut and olive at the other. - M6/M6 fittings for Magura 2005-2010, pre-2017 Racing Line, and Echo brakes, or M6/M8 fittings (with olive and shroud nut) for Magura HS33/HS11 brakes from 2011 onwards and 2017 and newer Racing Line brakes. - Sold singly. Please note: these are made from lengths of regular Trialtech Rim Brake Hose so your crossover may not feature a Trialtech logo, or part of one.

- High performance CNC rim brake pad refills from Jitsie. - Developed and tested with Jitsie team riders Nico Vallee and Alejandro Montalvo. - High performance compound designed for use with ground rims in dry or wet weather. - Great sound with good bite and hold hold while still maintaining superb wear life. - 7.5mm of pad material provides plenty of wear life. - Sold as a pair.

- High quality replacement pistons for 2005-2010 HS33 brakes from Racing Line. - CNC machined from high quality 6061 T6 aluminum. - Aluminum construction means the piston cannot swell when the brake is bled with water, a common problem with the original plastic Magura pistons. - Includes two O-rings. - 14mm piston is designed to fit 2005-2010 Magura HS33 and Racing Line FL001 levers, also works with Echo brake levers. - 13mm piston fits Racing Line Nano levers and Clean levers. - Available in anodized red.

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Replacement HS33 brake lever blade from Magura. - Fits 2014 and newer Magura HS33 rim brakes only, will not fit Magura disc brakes. - Longer 4-finger lever provides more power over the standard 2-finger lever. - Supplied with TPA kit. - Available in anodized black only.

- Brake pad refills of the famous TNN green LGM compound. - Designed for harshly ground rims and wet weather but also performs very well in dry conditions with lighter grinds. - Developed and tweaked with the help of a diverse range of riders (including Lewis Greenhalgh, Stan Shaw and Ali C) to provide awesome braking on all types of ground rims. - Great sound (they're loud) with sharp bite and tremendous hold while still maintaining superb wear life. - Compatible with TNN backings which have recess dimensions of 18mm x 8mm x 4mm, but may fit other manufacturer's backings with a slight modification. - 8mm of pad material provides plenty of wear life. - Supplied with detailed fitting instructions and TNN stickers. - Sold as a pair (two individual pad inserts).

- TNN's famous LGM brake pads in vee backings! - Acclaimed by many trials riders as the best vee pads in existence! - Designed for harshly ground rims and wet weather but also performs very well in dry conditions with lighter grinds. - Developed and tweaked with the help of a diverse range of riders (including Lewis Greenhalgh, Stan Shaw and Ali C) to provide awesome braking on all types of ground rims. - Great sound with sharp bite and tremendous hold while still maintaining superb wear life. - Hand-glued to TNN's trademark CNC backing, which is grit blasted inside the pad cavities, ultrasonic cleaned, glued under pressure and then hand sanded. - CNC-machined aluminum backing provides extra braking force and lever feedback since it is much stiffer than standard plastic backings. - 8mm of pad material provides plenty of wear life. - Sold as a pair.

- Lightweight titanium replacement grub screw/blanking bolt for Racing Line brake levers. - M6 thread size - New design features an o-ring on the bottom of the bolt, improving the seal over traditional grub screws. - Constructed from titanium. - Available in anodized black, gold or rainbow finish. - Compatible with Racing Line FL001 and Nano 28 levers only! - Maximum bolt torque 3Nm! Please Note: A small amount of grease should be applied to the threads before installation and it is imperative that these are not over-tightened. Doing so can result in the lever leaking!

- Replacement Magura compression sleeve nut, also known as a shroud nut. - Allows a standard hose to be fitted to levers using a new olive. - Compatible with 2014 and newer Magura HS33 levers as well as Magura MT disc brake levers. - NOT compatible with any pre-2014 Magura levers.